environmental protection Hand crank USB LED flashlight multi-function flashlight

1.Flashing alert 2.Mobile phone mobile power 3.Sticking to iron object 4.Cutting the strop in emergency

 

Hand crank USB LED flashlight multi-function flashlight

 

WORKING  PRINCILE:  

This product adopts the principle of there --phase alternating generator to  crank for power which after commutating and filtering to charge its inner  80mAh/3.6v NI-MH chargeable batterty. The electricity in the battery can  be used for lighting and charging mobile phone. 

FUNCTIONS: 

1. Cranking for power to charge the inner 80mAh/3.6v NI-MH chargeable  bottery which reserve electricity also.

2. Cranking for power to charge mobile phone through a connector and  wire.

3. One LED lighing 

4. Flashing alert

5. Breaking the strop in emergency 

6. Cutting the strop in emergency

7. Sticking to iron object 

MAIN TECHNICAL PARAMETERS: 

ITEM	PARAMETER	UNIT	ITEM	PARAMETER	UNIT
Max.brightness			Max.luminous flux
1LED light	60000	Mcd	1LED light	3.5	Lm
Lighting time after 1minute cranking			Lighting time after being charged carefully
1LED light	40	minute	1LED light	5	Hour
4*3LEDs flash	60	minute	4*3LEDs flash	12	Hour
			Flash frequency	2	HZ
Voltoge	5.7v/6.4v	v	Led lifetime	50000	Hour
Max.currentoutput	500	MA	Switch lifetime	100000	Times
Max.poweroutput	2.5	W	Plastic partslifetime	5	Year
If provides 3-8 minutes talking time to mobil phone by cranking 3 minutes			The whole unitlifetime	5	Year

OPERATION:

1. Lighting :Unlock the handle ;hold the unit by one hand . crank the handle by the other of the speed of 4circles per second for about one minute . Press  the switch ,the light will be off .

2. Flashing :Pressthe the flash switch once ,4red LEDs flash ,press again ,  they will be off 3. Charging mobile phone :Take off the DC cover ,insert one end off  connecting wire into the DC socke of this product and the other end into the  mobile phone . Hold the unit with one hand and crank the handle with the  other at the speed of 4circles per second .When the mobile phone give  indication . It means charging .4.Emergency  Treatment :

(1).Hammer :Take off the hammer cover ,hold the product and strike of the  object you want to break  .

(2). Cutting knife :Hold the product to cut the strop with cutting knife  

NOTICE:

1. Don't point at eyes directly so as not to hurt the eyes .

2. Put it at the place that children can't catch in case of hurting them.

3. Try to crank it evenly (keep rotating steadily ). Crank too slowly may reduce the current an so prolong the charging time .Cranking too violently may damage the driving system .

4. Pay attention to the holding gesture when cranking which can protect your  finger and nail from hurting .

5. In order to assure the life of the battery ,you should crank no more than  3minutes continuously  when it can't light.

6. In order to prolong the lifespan of the battery ,you should crank it for at least one minute once a month .

7. This product may not fully charge a mobile phone .

8. Use the wire that our compay specified to charge the specified brand of mobile phone ;otherwise it might damage the phone or battery.

9. Put it at the piace where you can reach easily so as to use in on  emergency .

environmental protection Hand crank USB LED flashlight multi-function flashlight